1. DL manuals
  2. Intermec
  3. PDA
  4. NORAND 6642
  5. Technical Reference

Intermec NORAND 6642 Technical Reference

Other manuals for NORAND 6642: User Manual, Quick Start Manual, Quick Start Manual, Manual
Manual is about: Pen Computer

Summary of NORAND 6642

  • Page 1

    6642 pen computer technical reference " " " " " " " " " " " " " " " " " " " " " " " " " " " " p/n: 978-054-007 revision a may 2000

  • Page 2

    " notice the information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service intermec manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of intermec. Disclaimer of warr...

  • Page 3: Contents

    Contents 6642 pen computer technical reference i contents " " " " " " " " " " " " " " " " " " " " " " " " " " " " section 1 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 4

    Contents ii 6642 pen computer technical reference loading pen drivers 3Ć11 . . . . . . . . . . . . . . . . . . . . . . . . . . Loading microsoft pen windows 2.0 3Ć11 . . . . . . . . . . . . Loading apm guard driver 3Ć21 . . . . . . . . . . . . . . . . . . . Setting up to create recovery media 3Ć22 ....

  • Page 5

    Contents 6642 pen computer technical reference iii before reimaging 6642 computer 5Ć4 . . . . . . . . . . . . . . . . . Determine server name 5Ć4 . . . . . . . . . . . . . . . . . . . . . . Ensure enabled fileĆsharing 5Ć4 . . . . . . . . . . . . . . . . . . Determine name of shared location 5Ć5 . . ...

  • Page 6

    Contents iv 6642 pen computer technical reference.

  • Page 7: Section 1

    6642 pen computer technical reference 1-1 section 1 introduction " " " " " " " " " " " " " " " " " " " " " " " " " " " " the material presented in this publication provides techniĆ cal reference for the 6642 pen computer and is intended for experienced application programmers and information sysĆ te...

  • Page 8

    Introduction section 1 1-2 6642 pen computer technical reference " section 4 Ċ desktop applications covers the two pen services supported by the 6642 computer, defines the features of the battery gauge application, and lists radio components available on the 6642 toolkit. " section 5 Ċ recovery proc...

  • Page 9: Indicator Leds

    Section 1 introduction 6642 pen computer technical reference 1-3 indicator leds to the right of the display are three twoĆcolor light emitĆ ting diode (led) indicators which indicate the status of the external power, main battery and hard disk drive. Keep in mind the leds only work when the 6642 com...

  • Page 10: Customer Support

    Introduction section 1 1-4 6642 pen computer technical reference customer support customer support's onĆgoing objective is to provide quality support to all of our customers worldwide. Factory service if your unit is faulty, you can ship it to the nearest authorized service center for factoryĆqualit...

  • Page 11: Bulletin Board Service

    Section 1 introduction 6642 pen computer technical reference 1-5 select products" → manuals" → english" from the home page. Bulletin board service the customer support bulletin board (bbs), maintained by the norand pen systems division of intermec technoloĆ gies corporation, provides software and...

  • Page 12

    Introduction section 1 1-6 6642 pen computer technical reference.

  • Page 13: Section 2

    6642 pen computer technical reference 2-1 section 2 cmos setup " " " " " " " " " " " " " " " " " " " " " " " " " " " " press the key from the keypad or when prompted to do so to access the phoenixbios setup utility" window. Use this window to configure adapters, integrated peripherĆ als, passwords,...

  • Page 14: Main

    Cmos setup section 2 2-2 6642 pen computer technical reference main the main" menu of the cmos window configures the sysĆ tem time and date, drives, and cache. System time sets the time of day. Initial value is 00:00:00. System date sets the date. Initial value is 1988/01/01. Diskette a this option...

  • Page 15

    Section 2 cmos setup 6642 pen computer technical reference 2-3 " primary master: configures the hard disk drive (hdd). To enter hdd parameters manually, select user." to have hdd parameters set automatically, select auto" (deĆ fault). Select none" to disable the hdd. The cdĆ rom and atapi removab...

  • Page 16: Advanced

    Cmos setup section 2 2-4 6642 pen computer technical reference advanced the advanced" page lets you modify peripherals, display, and operating system features. Com port sets the internal serial port. The internal values are set as follows: com port=enabled base i/o address=3f8 interrupt=irq4 ir por...

  • Page 17

    Section 2 cmos setup 6642 pen computer technical reference 2-5 com port: enables (default) or disables com port options. Auto (if selected),allows the bios or os to choose the port configuration. " base i/o address (3f8): enables or disables the rsĆ232c serial port for use (default is enabled) and d...

  • Page 18

    Cmos setup section 2 2-6 6642 pen computer technical reference " lpt port: enables or disables (default) the use of the printĆ er and parallel floppy port. " mode: sets the mode of the lpt port Ċ output only, bidirectional (default), epp, or ecp. " base i/o address: 378 (default),278,3bc " interrupt...

  • Page 19: Security

    Section 2 cmos setup 6642 pen computer technical reference 2-7 security this menu configures passwords and security functions. Set supervisor password sets the supervisor password. The initial setting is no password". Set user password sets the user password. System enters bios setup with password ...

  • Page 20

    Cmos setup section 2 2-8 6642 pen computer technical reference " diskette access: (applicable if passwords are used.) specifies who can have access to the floppy disk drive, supervisor" or user." (default is supervisor) " fixed disk boot sector: defines whether the boot sector of the hdd is writeĆ...

  • Page 21: Power

    Section 2 cmos setup 6642 pen computer technical reference 2-9 power the power" menu configures power management methods and suspend mode. Power switch sets the action of the power switch. Menu options: on-off, suspend-reĆ sume, on-only. The initial setting is on-only. Power management enables or d...

  • Page 22

    Cmos setup section 2 2-10 6642 pen computer technical reference " suspend mode: sets the type of suspend performed during userĆinitiĆ ated suspend Ċ suspend to ram" Ċ save state but remain in low power mode (default) or suspend to disk" Ċ save state to disk and power off. " resume on modem ring: d...

  • Page 23: Boot

    Section 2 cmos setup 6642 pen computer technical reference 2-11 boot use this page to set the order in which the 6642 computer attempts to boot from bootable devices. Removable devices include virtual flash, parallel, and usb floppies. Pcmcia boot sets whether pcmcia device boot is supported or not....

  • Page 24: Exit

    Cmos setup section 2 2-12 6642 pen computer technical reference exit this page shows how the system is to exit cmos setup. Exit saving changes exit system setup and save your changes in cmos. Exit discarding changes exit utility without saving setup data to cmos. Load setup defaults load default val...

  • Page 25: Section 3

    6642 pen computer technical reference 3-1 section 3 toolkit for the 6642 computer " " " " " " " " " " " " " " " " " " " " " " " " " " " " this section deals with how software, drivers, and tools are created, supported, and packaged for the 6642 pen computer. The toolkit contains windows resources fo...

  • Page 26: 6642 Toolkit Set Up

    Toolkit for the 6642 computer section 3 3-2 6642 pen computer technical reference the 6642 computer, as shipped from the factory, has loaded the boot media with windows 98. This also includes all windows 98 installation files typically shipped on a winĆ dows 98 cd. The toolkit does not include appli...

  • Page 27

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-3 installing toolkit components components can be loaded into the 6642 computer via the 6642 toolkit using the wise installation wizard" applicaĆ tion. We recommend that each component be loaded sepaĆ rately to ensure t...

  • Page 28

    Toolkit for the 6642 computer section 3 3-4 6642 pen computer technical reference 3. Use the select components" window to select which component to load onto your 6642 computer, then click the next button to continue. See next page for executables and pages with additional information about these c...

  • Page 29

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-5 below is a list of executables that go with each of the components listed in the select components" window. Table 3Ć1 component executables components executable pen: drivers pen.Exe microsoft pen windows 2.0 6642pen....

  • Page 30

    Toolkit for the 6642 computer section 3 3-6 6642 pen computer technical reference 4. Click the install button in the ready to install! WinĆ dow to begin the installation. 5. Each of the components selected from the select comĆ ponents" screen (page 3Ć4) is loaded separately. BeĆ fore each componen...

  • Page 31: Completing The Installation

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-7 " if you decide not to load a component, click the abort installation button to move to the next component or to the end of the installation. " click the continue installation button if you elect to continue loading th...

  • Page 32

    Toolkit for the 6642 computer section 3 3-8 6642 pen computer technical reference.

  • Page 33

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-9 some components, when loaded onto the 6642 computer, will generate the following install" prompt. Click the ok button to reboot the system or click the cancel button to load the next component..

  • Page 34: Setting Up The Driver

    Toolkit for the 6642 computer section 3 3-10 6642 pen computer technical reference setting up the driver you do need to reboot the 6642 computer after you have completed these driver loads, to have these components work on the 6642 computer. Go to the page listed with each component to continue inst...

  • Page 35: Loading Pen Drivers

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-11 loading pen drivers the pen drivers component loads pen drivers automatically into the 6642 computer. When done, an install" prompt appears to remind you to reboot the 6642 computer to upĆ date the configuration file...

  • Page 36

    Toolkit for the 6642 computer section 3 3-12 6642 pen computer technical reference if you do have a license for penx recognition, install the cic penx recognition software. 1. The penx software files will go to a temporary locaĆ tion during the installation, then transfer to a more permanent locatio...

  • Page 37

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-13 2. The welcome" screen lists a reminder about the need to shut down other windows applications to ensure a successful installation. Do as instructed, then click next to continue..

  • Page 38

    Toolkit for the 6642 computer section 3 3-14 6642 pen computer technical reference 3. The following screen contains a standard license agreement, click the yes button to agree to the license and continue the installation..

  • Page 39

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-15 4. Click the browse button to change the default c:\program files\cic" folder (or directory). Click the next button to continue..

  • Page 40

    Toolkit for the 6642 computer section 3 3-16 6642 pen computer technical reference 5. Use this screen to indicate whether this is to be a typiĆ cal pen service (default) or a custom pen service. Click the next button to continue. If you selected a typical installation, go to step 7..

  • Page 41

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-17 6. If you elected to have a custom installation, use the select components" screen to specify what compoĆ nents are to be installed in the 6642 computer. Click the next button to continue..

  • Page 42

    Toolkit for the 6642 computer section 3 3-18 6642 pen computer technical reference 7. The next screen verifies whether your stylus pen has a button. Choose the pen has no button option, then click the next button to continue..

  • Page 43

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-19 8. The check setup information" screen prompts you to verify the settings assigned for the pen recognition service. Click the back button to redo any of the setĆ tings, or click the next button to finish the installa...

  • Page 44

    Toolkit for the 6642 computer section 3 3-20 6642 pen computer technical reference 9. The second setup complete" screen prompts you to reboot the 6642 computer to update the system propĆ erties. Select the yes option, then click the finish button to reset the computer. If you want to reset the 6642...

  • Page 45: Loading Apm Guard Driver

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-21 loading apm guard driver the apm guard driver component enables the proper funcĆ tioning of advanced power management (apm) devices. The apm guard driver is loaded automatically into the 6642 computer, when done, an ...

  • Page 46

    Toolkit for the 6642 computer section 3 3-22 6642 pen computer technical reference setting up to create recovery media the create recovery media" component lets you set up a recovery installation either to the floppy drive or to a temĆ porary directory. Use the bootable diskette creation" screen t...

  • Page 47

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-23 bootable network recovery diskette a compressed image of an entire hard drive can be stored in a single *.Pqi file. Power quest easyrestore (pqer) is the product that can take the *.Pqi file and restore the entire har...

  • Page 48

    Toolkit for the 6642 computer section 3 3-24 6642 pen computer technical reference " note: it is recommended that you do not use a computer name or a share name with a space or a wild character, such as an asterisk (*), a semicolon (:), or an exclamation point (!). These characters or a blank space ...

  • Page 49

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-25 3. Use the select image class" screen to pick one of three recovery images to be restored, then click the continue button: " toolkit's standard windows 98 image inĆ cludes nonessential files such as most thirdĆparty ...

  • Page 50

    Toolkit for the 6642 computer section 3 3-26 6642 pen computer technical reference the use the default . . . Option uses phdisk/create" to create a std partition. The size of the std partiĆ tion will vary depending on the size of ram in the 6642 computer being recovered. For example, if the 6642 co...

  • Page 51

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-27 5. If a floppy drive is attached, the destination locaĆ tion" screen will default to drive a:. Use drive a: or the floppy disk drive to store the recovery. For this example, the floppy disk drive is drive d:. For a t...

  • Page 52

    Toolkit for the 6642 computer section 3 3-28 6642 pen computer technical reference 6. After files are transferred to the location designated by the previous screen, the following completion screen appears with a caution against writeĆprotecting the newly created recovery disk. Click the finish butto...

  • Page 53

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-29 bootable network cloning diskette images on the toolkit cd are standard images for anyone that orders the toolkit cd. You may want to install images on units that already have applications and custom configuĆ rations ...

  • Page 54

    Toolkit for the 6642 computer section 3 3-30 6642 pen computer technical reference to create the custom image for cloning: 1. If you do not know the server name (computer name) of your 6642 computer, select start → settings → control panel to access the control panel," then doubleĆclick the network...

  • Page 55

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-31 2. Using the \\server name\share name" format, enĆ ter the server name (computer name) and share name of the location where the 6642 toolkit cd can be found in the text field of the pqdi share location" screen, then...

  • Page 56

    Toolkit for the 6642 computer section 3 3-32 6642 pen computer technical reference 3. Using the \\computer name\share name" format, enter the server name (computer name) and share name of the location where the custom 6642image.Pqi image file can be stored, then click the continue button. 4. Use th...

  • Page 57

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-33 5. If a floppy drive is attached, the destination locaĆ tion" screen will default to drive a:. Use drive a: or the floppy disk drive to store the recovery. For this example, the floppy disk drive is drive d:. For a t...

  • Page 58

    Toolkit for the 6642 computer section 3 3-34 6642 pen computer technical reference bootable network diskette the 6642 computer can use this disk to boot up to dos and connect to a server, providing the microsoft file and printer sharing" function is enabled (see page 3Ć36). 1. If a floppy drive is ...

  • Page 59

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-35 2. After files are transferred to the designated location, the following completion screen appears with a cauĆ tion. Click the finish button to exit, then click the finish button on the installation completed" screen...

  • Page 60

    Toolkit for the 6642 computer section 3 3-36 6642 pen computer technical reference to set up a server to share a 6642 toolkit cd for recovery, you must enable microsoft file sharing:" 1. From the windows desktop, select start → settings → control panel for the control panel" window. DoubleĆclick t...

  • Page 61

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-37 3. Click the file and print sharing button to access the file and print sharing" window. Ensure that both boxes are checked. If not, check both boxes, then click the ok button to save and return to the network" wind...

  • Page 62: Battery Gauge Utility

    Toolkit for the 6642 computer section 3 3-38 6642 pen computer technical reference battery gauge utility from the 6642 toolkit, you can install a battery gauge utilĆ ity that monitors the status of the main battery. If installed on the 6642 pen computer, a battery meter icon would appear on the wind...

  • Page 63

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-39 battery gauge utility update if the battery gauge does not display the correct capacity after recharge, a utility program is available for download. Refer to customer support in the introduction section of this refere...

  • Page 64

    Toolkit for the 6642 computer section 3 3-40 6642 pen computer technical reference installing to flash memory card you need to install the update utility into a flash memory card by using the installation floppy disk. Hardware needed: " 6642 pen computer " ac adapter " floppy disk drive/port replica...

  • Page 65: Installing To The 6642

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-41 installing to the 6642 hardware needed: " ac adapter " the update utility flash memory card " 6642 pen computer 1. Connect the ac adapter to the pen computer. 2. Insert the update utility flash memory card into the pc...

  • Page 66: Error Messages

    Toolkit for the 6642 computer section 3 3-42 6642 pen computer technical reference error messages if the update utility installation fails, the detail of the error cause is displayed on the bottom left portion on the screen. If the following message is displayed, there is no "proĆ grams" directory u...

  • Page 67

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-43 running the utility from windows 98 1. From the desktop, select start → programs → bat_tool from the windows start menu. The first setup screen appears. 2. Follow the instructions outlined onscreen before clickĆ ing t...

  • Page 68

    Toolkit for the 6642 computer section 3 3-44 6642 pen computer technical reference this screen displays the option for initializing the internal battery alone or both internal and expansion battery pack. Click on the next button to continue..

  • Page 69

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-45 the initialization chargeis displayed for the internal batĆ tery and the expansion battery if connected. Click the close button to exit the battery utility..

  • Page 70

    Toolkit for the 6642 computer section 3 3-46 6642 pen computer technical reference 802.11 ds radio driver installation doubleĆclick the installation executable (icon shown left) to start the installation. 1. The first screen is a welcome" screen with a reminder to close all windows applications bef...

  • Page 71

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-47 2. Choose one of the following from the select compoĆ nents" screen, then click the next button to start the installation. " select drivers and analysis tool (default) to include various analysis tools. If you select...

  • Page 72

    Toolkit for the 6642 computer section 3 3-48 6642 pen computer technical reference 3. If you chose drivers and analysis tool in step 2, the choose destination location" screen appears with a destination folder in which the analysis tools will be installed (802.11 ds utility). If you wish to change ...

  • Page 73

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-49 4. Use the select program manager group" window to elect what folder (group) the setup program is to add the analysis tools. A check mark in the add additional shortcut on desktop creates a shortcut icon for the wind...

  • Page 74

    Toolkit for the 6642 computer section 3 3-50 6642 pen computer technical reference 5. Click the next button to start the installation..

  • Page 75

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-51 6. An installing" screen displays the files transferred from the toolkit into the destination directory, then the final installation complete" screen appears with a reminder about disks or sandisk cards. Click the f...

  • Page 76: 802.11 Ds Utility

    Toolkit for the 6642 computer section 3 3-52 6642 pen computer technical reference 802.11 ds utility from the windows desktop, select start → programs → intermec → 802.11 ds utility or doubleĆclick the 802.11 ds utility icon (shown left) for the intermec 802.11 ds utility vx.Xx" window which provid...

  • Page 77

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-53 if you just want to view just the status information, click the upperĆright box (shown left) to minimize the window to this. Click the box again to return to the expanded view shown on the previous page. A satellite d...

  • Page 78: Pop-Up Menu Options

    Toolkit for the 6642 computer section 3 3-54 6642 pen computer technical reference pop-up menu options touch anywhere in the 802.11 ds utility" window (outside the status, impact, and details boxes) to bring up the following popĆup menu. To remove the popĆup menu from view, touch inside the three b...

  • Page 79

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-55 program properties to have the intermec 802.11 ds utility vx.Xx" window activate when the 6642 is started up: 1. Bring up the popĆup menu, then select program properties to access the properties" window. 2. Add a ch...

  • Page 80

    Toolkit for the 6642 computer section 3 3-56 6642 pen computer technical reference site survey the 802.11 ds lan site monitor" window monitors the optimal positions of access points within your network. The site monitor" page provides access point information and allows you to reset or freeze the ...

  • Page 81

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-57 the selection" page lets you choose an infrastructure netĆ work to monitor..

  • Page 82

    Toolkit for the 6642 computer section 3 3-58 6642 pen computer technical reference the log settings" page lets you write log measurement data to a file..

  • Page 83

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-59 use the ap names" window to create names for the access points displayed in the site monitor for easier identification as opposed to reading mac addresses of those access points. Click the help button for additional ...

  • Page 84

    Toolkit for the 6642 computer section 3 3-60 6642 pen computer technical reference general version info to access the version information" window, bring up the popĆup menu, then select general version info to access the version information" window. This window provides information about the varian...

  • Page 85

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-61 click the more button to access additional information about the access point. Click the ok button to exit the additional information, then click ok again to exit the version information" window..

  • Page 86

    Toolkit for the 6642 computer section 3 3-62 6642 pen computer technical reference card statistics to access the 802.11 ds lan card statistics" window, bring up the popĆup menu, then select card statistics. The 802.11 ds lan card statistics" window monitors card communications by way of counters. ...

  • Page 87

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-63 driver/firmware/card test " note: using this feature will temporarily break communications contact with your 802.11 ds lan card. To access the card check" window, bring up the popĆup menu, then select driver/firmware...

  • Page 88

    Toolkit for the 6642 computer section 3 3-64 6642 pen computer technical reference if you choose to go ahead and check the card status, click the test card now button. A warning message appears advising of the temporary loss of contact with your card. Click the cancel button to return to the card c...

  • Page 89

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-65 link partner test to access the 802.11 ds lan Ċ link test" window, bring up the popĆup menu, then select link partner test. The 802.11 ds lan Ċ link test" window provides an onĆ going record of test messages transmi...

  • Page 90

    Toolkit for the 6642 computer section 3 3-66 6642 pen computer technical reference the test history" page displays the measurements in a graphical line chart and can be configured to types of signal and noise displays at intervals of one minute, one hour, or 24 hours. In both the test results" and...

  • Page 91

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-67 update radio firmware " note: while the wavelan/ieee pc card is backwards-compatible, a num- ber of features shown in the previous pages will not work if the driver version does not match the embedded software version...

  • Page 92

    Toolkit for the 6642 computer section 3 3-68 6642 pen computer technical reference 1. The first screen lists the embedded software version of the wavelan/ieee pc card along with the current wavelan/ieee driver in the 6642. Click the close button to exit this feature if you do not need to update the ...

  • Page 93

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-69 2. A cautionary message appears to warn against power loss during this procedure, as a power loss can damage your wavelan/ieee pc card during the download. Follow the advice given to ensure there will be no power loss...

  • Page 94: Uninstall Old Radio Driver

    Toolkit for the 6642 computer section 3 3-70 6642 pen computer technical reference 4. The following message appears to note a successful download and to remind you to update the wavelan/ ieee pc card if necessary. Click ok to exit. The wavelan/ieee station firmware update" screen now shows the newe...

  • Page 95

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-71 2. DoubleĆclick the add/remove programs icon (shown left) to access the add/remove programs properties" window. 3. Select the utility to be removed from the list of softĆ ware, intermec 802.11 ds utility (client onl...

  • Page 96

    Toolkit for the 6642 computer section 3 3-72 6642 pen computer technical reference 4. The select uninstall method" screen gives you two ways to remove the radio utility from the 6642. " select automatic" for the default uninstall method to remove the entire utility (page 3Ć79). " select custom" t...

  • Page 97

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-73 1. The select private files to remove" screen lists softĆ ware used by the 802.11 ds utility. Select the files to be removed, then click the next button to continue..

  • Page 98

    Toolkit for the 6642 computer section 3 3-74 6642 pen computer technical reference 2. The select system files to remove" screen lists the files that were copied to system directories within the 6642. Select the files to be removed, then click the next button to continue..

  • Page 99

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-75 3. The select directories to remove" screen names the directories that were created to contain 802.11 ds utility files. Select the directories to be removed, then click the next button..

  • Page 100

    Toolkit for the 6642 computer section 3 3-76 6642 pen computer technical reference 4. The select registry keys to remove" screen names the registration database keys created during the installation of the radio utility. Select the keys to be removed, then click the next button to continue..

  • Page 101

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-77 5. The select registry keys to edit" screen lets you choose registration database keys that were altered during the installation, to allow for changing the inforĆ mation back to prior the installation..

  • Page 102

    Toolkit for the 6642 computer section 3 3-78 6642 pen computer technical reference 6. The select subĆsystems to remove" screen lists the subsystems that were configured for the radio utility. Select the subsystems to be removed, then click the next button to complete the uninstallation (go to the n...

  • Page 103

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-79 7. The perform uninstall" screen names the utility that is about to be removed from the 6642 system. Click the finish button to start the uninstallation if this is the correct utility. If the utility is not correct, ...

  • Page 104: Add New Radio Driver

    Toolkit for the 6642 computer section 3 3-80 6642 pen computer technical reference add new radio driver if the 802_11ds.Exe shortcut icon (shown left) is on the 6642 desktop, go to the next page. If the applicable shortcut is not on the desktop, from the windows desktop, select start → find → files ...

  • Page 105

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-81 doubleĆclick the installation executable (icon shown left) to start the installation. 1. The first screen is a welcome" screen with a reminder to close all windows applications before starting this installation. If y...

  • Page 106

    Toolkit for the 6642 computer section 3 3-82 6642 pen computer technical reference 2. Choose one of the following from the select compoĆ nents" screen, then click the next button to start the installation. " select drivers and analysis tool (default) to include various analysis tools. If you select...

  • Page 107

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-83 3. If you chose drivers and analysis tool in step 2, the choose destination location" screen appears with a destination folder in which the analysis tools will be installed (802.11 ds utility). If you wish to change ...

  • Page 108

    Toolkit for the 6642 computer section 3 3-84 6642 pen computer technical reference 4. Use the select program manager group" window to elect what folder (group) the setup program is to add the analysis tools. A check mark in the add additional shortcut on desktop creates a shortcut icon for the wind...

  • Page 109

    Section 3 toolkit for the 6642 computer 6642 pen computer technical reference 3-85 5. Click the next button to start the installation..

  • Page 110

    Toolkit for the 6642 computer section 3 3-86 6642 pen computer technical reference 6. An installing" screen displays the files transferred from the toolkit into the destination directory, then the final installation complete" screen appears with a reminder about disks or sandisk cards. Click the f...

  • Page 111: Section 4

    6642 pen computer technical reference 4-1 section 4 desktop applications " " " " " " " " " " " " " " " " " " " " " " " " " " " " this section covers applications found on the windows desktop once installed from the 6642 toolkit. The applicaĆ tions include two pen recognition services and battery met...

  • Page 112: Microsoft Pen Services 2.0

    Desktop applications section 4 4-2 6642 pen computer technical reference microsoft pen services 2.0 the microsoft pen services application is accessed by selectĆ ing start → programs → pen services from the desktop. The sk.Exe screen keyboard, from microsoft windows for pen computing, runs on window...

  • Page 113

    Section 4 desktop applications 6642 pen computer technical reference 4-3 2. Click the motion tab to access the pointer features (see next page)..

  • Page 114

    Desktop applications section 4 4-4 6642 pen computer technical reference 3. Check to ensure there is no check mark in the show pointer trails check box in the pointer trail" area. If there is a check mark, click the box to remove the check mark. Click the apply button, then click the ok button to e...

  • Page 115: Handwriter Help

    Section 4 desktop applications 6642 pen computer technical reference 4-5 cic penx recognition software the cic penx recognition software application is a handĆ writing recognition system with a number of additional apĆ plications. Access these from the desktop by selecting start → programs → cic pen...

  • Page 116

    Desktop applications section 4 4-6 6642 pen computer technical reference double tap the double tap page sets the speed and area at which you can tap the screen to incur double-click." click apply to save the settings; click ok to quit..

  • Page 117

    Section 4 desktop applications 6642 pen computer technical reference 4-7 recognition use this page to enable recognition and inking, to dictate how soon the 6642 pen computer records your writing, and to enable a dictionary or automatically insert spaces beĆ tween words. Click apply to save; click o...

  • Page 118

    Desktop applications section 4 4-8 6642 pen computer technical reference mode the mode page sets the function of the button on the stylus pen, logon options, and accesses the toolbar options" screen..

  • Page 119

    Section 4 desktop applications 6642 pen computer technical reference 4-9 if toolbar is enabled, click toolbar options to access the following screen. Click ok to save and quit. " floating toolbar places a small, two-button box on the desktop. " tray icon puts a rotating pencil" (inking) and pointĆ...

  • Page 120: Macro Editor

    Desktop applications section 4 4-10 6642 pen computer technical reference macro editor access the gesture macro editor" either through the handwriter settings" → recognition" page (see page4-7) or by selecting start" programs" cic penx x.Xx → macro editor from the desktop. Click edit, then save t...

  • Page 121

    Section 4 desktop applications 6642 pen computer technical reference 4-11 below is the editor showing the comments version. Click show macros to see the macro version (shown previous page)..

  • Page 122: Onscreen Keyboard

    Desktop applications section 4 4-12 6642 pen computer technical reference onscreen keyboard select start → programs → cicpenx x.Xx → onscreen keyboard from the desktop, then click the keyboard icon from the system tray to access the following onscreen keyĆ board for typing with a stylus. This may be...

  • Page 123: Recognition Tuner

    Section 4 desktop applications 6642 pen computer technical reference 4-13 recognition tuner access the training wizard" either through the handwritĆ er settings" recognition" page (see page 4-7) or by selectĆ ing start programs → cic penx x.Xx → recognition tuner fromthe desktop to access the tr...

  • Page 124: Penx Support

    Desktop applications section 4 4-14 6642 pen computer technical reference penx support review the online help file to become familiar with these applications. For additional information, visit the cic web site at: http://www.Cic.Com for faqs and other product information. If you still need technical...

  • Page 125: Section 5

    6642 pen computer technical reference 5-1 section 5 recovery procedures " " " " " " " " " " " " " " " " " " " " " " " " " " " " this section defines several ways you can do system recovĆ eries on the 6642 computer. The components needed for a 6642 recovery procedure are available in the 6642 toolkit...

  • Page 126: Assumptions

    Recovery procedures section 5 5-2 6642 pen computer technical reference assumptions the following assumptions are made prior to conducting a system recovery: " only two partitions exist on a hdd image, a fat32 main partition is in position 1 of the partition table, and an std is placed in position 4...

  • Page 127: Required Components

    Section 5 recovery procedures 6642 pen computer technical reference 5-3 required components the following components are needed for a bios recovery: " a parallel floppy drive and a parallel port " a 6642 crisis recovery" floppy disk the following components are required for a system recovĆ ery usin...

  • Page 128: Determine Server Name

    Recovery procedures section 5 5-4 6642 pen computer technical reference shared location recovery process the following instructions list what is needed and tell how to restore or update the hard drive on the 6642 computer via a shared location on the host computer. Before reimaging 6642 computer do ...

  • Page 129

    Section 5 recovery procedures 6642 pen computer technical reference 5-5 determine name of shared location determine the name of the shared location of the 6642 toolĆ kit cdĆrom via the host computer. 1. Access windows explorer," then rightĆclick the cdĆ rom drive to access the popĆup menu. 2. Selec...

  • Page 130

    Recovery procedures section 5 5-6 6642 pen computer technical reference ensure protocols are available to ensure that the host computer has the netbeui" and ipx/spxĆcompatible protocol" components installed. 1. From the host computer's windows desktop, rightĆ click the network neighborhood icon to...

  • Page 131

    Section 5 recovery procedures 6642 pen computer technical reference 5-7 5. DoubleĆclick the protocol" option for the select netĆ work protocol" window. Select microsoft" from the manufacturers box, then select either netbeui" or the ipx/spxĆcompatible protocol" option. Click the ok button to ap...

  • Page 132: Shared Location Reimaging

    Recovery procedures section 5 5-8 6642 pen computer technical reference follow the screens as defined in section 4, starting on page 3Ć22. Note the following exceptions: " in the pqdi toolkit share location" screen (sample on page 3Ć31), enter the host computer name (from page 5Ć4) and the cdĆrom s...

  • Page 133

    Section 5 recovery procedures 6642 pen computer technical reference 5-9 an easyrestore" application appears to list support cenĆ ter information and the progress of the copied files. The imaging is successful when you see the following on a blank screen on the 6642 computer: –––––––––––––––––––––––...

  • Page 134: System Cloning Process

    Recovery procedures section 5 5-10 6642 pen computer technical reference system cloning process system cloning is the same method as the reimaging proĆ cess with one exception. Instead of using an image from the 6642 toolkit cd, create the image from the 6642 comĆ puter with the custom settings and ...

  • Page 135: Clone Source Computer Image

    Section 5 recovery procedures 6642 pen computer technical reference 5-11 you may get a message noting the quantity of toolkit files. Click the ok button to continue. " note: you need the external keyboard on both the source 6642 computer and the target 6642 computer to continue. Clone source compute...

  • Page 136

    Recovery procedures section 5 5-12 6642 pen computer technical reference.

  • Page 137: Index

    Index 6642 pen computer technical reference index-1 index " " " " " " " " " " " " " " " " " " " " " " " " " " " " numbers 2.4 ghz open air utility removing old, 3Ć70 uninstalling old, 3Ć70 2_4openair.Exe, 3Ć70 6640 toolkit components, 3Ć5 installing, 3Ć3 802.11 ds radio driver installaĆ tion, 3Ć46 8...

  • Page 138

    Index index-2 6642 pen computer technical reference h handwriting recognition, cic penx recognition software, 4Ć13 hard drive images, 5Ć1 i images custom, 3Ć25 windows, standard, 3Ć25 improper configuration 802.11 ds utility, 3Ć70 rangelan2 radio driver, 3Ć70 indicator leds, 1Ć3 infrastructure netwo...

  • Page 139

    Index 6642 pen computer technical reference index-3 recovery procedure, 5Ć8 server name, 5Ć4 shared location name, 5Ć5 signal strength, 802.11 ds utilĆ ity, 3Ć65 sk.Exe, 4Ć2 standard windows image, 3Ć25 startup application for 802.11 ds utility, 3Ć55 supervisor password, cmos setup, 2Ć7 suspend mode...

  • Page 140

    Index index-4 6642 pen computer technical reference.